Coolstrip LED Lighting Product Catalogue

LED Lighting Product Catalogue

On-Line LED Lighting Product Catalogue
Clicking a link opens the PDF product datasheet in a new window.
Requires Acrobat Reader

Catalogue created on Monday 06th of August 2012 at 6:35 pm

LED Lighting
Colour Strip - ColourStrip is a versatile PCB mounted RGB colour change strip. Each LED has 3 Dies, one red, one green, and one blue to give a uniform distribution of light. Can use Manual, automatic pre-set sequence or DMX control.

FlexLed IP65 - FlexLED IP65 is a versatile encapsulated True White LED lighting strip. The LED's are sealed into a flexible plastic strip to keep out water ingress. This product is very low power (7.2 W per strip)

FlexLed SMT - FlexLed SMT is a versatile flexible LED strip. The surface mount LED's are on an 8mm wide flexible PCB. Very low power (4.8 W per metre) and can be used with our range of power supply units.

FlexLed SMT HB - High brightness FlexLed SMT is a versatile flexible surface mount adhesive backed LED strip available in true white or warm white.

FlexLed SMT HB RGB - High Brightness FlexLed SMT RGB is an adhesive backed colour changing flexible LED strip.

FlexLed SMT IP67 - FlexLed SMT-IP67 is a versatile flexible waterproof LED strip. The surface mount LED’s are on an 10mm wide flexible PCB encapsulated in silicon, with 3M adhesive tape on the rear to allow quick and easy installation.

FlexLed SMT RGB - FlexLed SMT RGB is a versatile flexible colour changing LED strip. The surface mount LED's are on a 10mm wide flexible PCB with 3M adhesive tape on the rear to allow quick and easy installation. This product is very low power (7.2 W per metre)

Stair Nosing - Coolstrip LED in anodised aluminium stair nosing provides a tough reliable and long term solution to stair edge lighting. As Coolstrip is IP 67 rated it can be used for exterior applications as well as interior

Downlighter Catalogue - Our NEW Downlighter specification catalogue.

Downlighter 1W - Pure white or warm white downlighter LED Illumination in a 42mm fitting

Downlighter 3W - Pure white or warm white 3 watt LED downlighter in a 90mm fitting

Downlighter 5W - A 5 watt LED downlighter available in pure white or warm white in a 108mm fitting

Downlighter 7W - 7 watts per module from this high power LED downlighter

Downlighter 12W - 12 watts of pure white or warm white illumination from this high power LED downlighter

Power Led 3 RGB - These 50mm diameter LED modules fit into standard open back MR16 fittings. They can be used with DMX or manual colour change electronics.

Power Led 3 IP67 Walkover - An IP67 sealed 105mm diameter walk over LED fittings accommodate our standard 3 x 1 watt LED modules.

Power Led 3 White - These 50mm diameter LED modules fit into standard open back MR16 fittings. They can be used with various SDL driver electronics.

Power Led 9 RGB - High brightness RGB LED module to fit into a standard MR16 fitting

Power Led 9 White - High brightness white LED module to fit into a standard MR16 fitting

PowerStrip V30/V15 Slimline - Available in both 30 and 15 power led versions for wall washing and spot lighting applications. Adjustable brackets allow flexibility of positioning.

Stair Light - This low cost, low energy stair marker lighting is purpose designed to provide a fit and forget solution for restaurant, bars, and night-club venues.

Drivers and Controllers
In-line LED Dimmer Controller - A single channel In-line LED Dimmer Controller, can drive 5 metres FlexLED SMT from 12Vdc

Colour Driver - RGB Remote Colour Controller & Sequencer allows the user to select solid colours and colour change sequences with variable speeds.

Colour Pad - RGB Infra Red Controller allows the user to select solid colours and colour change sequences with variable speeds and comes with a credit card sized remote handset.

ColourPAD 44 - RGB Infra Red Remote Colour Controller & Sequencer, to select solid colours and colour change sequences with variable speeds

CT110 LED Dimmer - The CT-110 LED Dimmer Controller can be used to drive FlexLED SMT in conjunction with a suitable 12v dc power supply

DMX 100 - The DMX 100 is a purpose designed LED controller for use with our PX24500 DMX driver or any other DMX 512 driver.

Power Driver 16 - PowerDriver 16 is a purpose designed LED driver capable of driving up to 16 Luxeon 1 Watt LED's

Power Driver 9 - PowerDriver 9 is a purpose designed LED driver capable of driving up to 9 Luxeon 1 Watt LED's.

PX 24500 DMX LED Driver - The PX24500 is a purpose designed LED driver capable of driving 12 or 24V DC LED's.

RGB Rotary Dimmer Controller - Individual control of Red, Green and Blue of up to 25 metres of FlexLED SMT RGB

RP306 Data Repeater - The RP306 is a purpose designed LED data repeater capable of driving 12 or 24V DC LED's.

SDL 3200 Intelligent Dimmer - An intelligent dimmer specially designed for LED lighting. With the most advanced PWM digital technology tot enables you to adjust the brightness by the knob and also the IR remote.

SDL-3900 Kit - The SDL-3900 Controller, Panel & Remote kit can bre used to drive RGB FlexLED SMT, PowerStrip V15/30. Items also available individually.

SDL-3900 Controller - The SDL-3900 LED RGB Controller can be used to drive RGB FlexLED SMT, PowerStrip V15/30

SDL-3900 Panel - The SDL-3900 Panel accompanies the SDL-3900 Controller for use with FlexLED SMT RGB or PowerStrip V30/V15

SDL-3900 Remote - The SDL-3900 Remote accompanies the SDL-3900 Controller for wireless control over FlexLED SMT RGB or PowerStrip V30/V15.

Power Supply Units
Power Supply Catalogue - The NEW Power Supply Specification Catalogue from SDL Lighting with Voltage Rating, Current Rating, Power Rating and Dimensions.

SDL 150 IP66 PSU - A versatile IP66 rated 12v DC power supply unit. Ideal for use with low voltage 12v DC led strip and modules, or any other equipment that requires 12v DC power and IP66 protection.

SDL 150 PSU - A versatile 12v DC power supply unit. Ideal for use with low voltage 12v DC led strip and modules, or any other equipment that requires 12v DC power.

SDL 350 PSU - A versatile 12v DC power supply unit. Ideal for use with low voltage 12v DC led strip and modules, or any other equipment that requires 12v DC power.

SDL 36 - 36 Watt 12v DC PSU. A versatile 12v DC PSU. Ideal for use with low voltage 12v DC led strip and modules or any equipment that requires a 12v DC power supply.

SDL 72 - A 72 Watt 12v DC Power Supply Unit. Ideal for use with low voltage 12v DC led strip and modules or any equipment that requires a 12v DC power supply.

SDL 120 - A 120 Watt 12v DC Power Supply. For use with low voltage 12v DC led strip and modules or any equipment that requires a 12v DC PSU.

Redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

You may print or download to a local hard disk extracts for your personal and non-commercial use only

You may copy the content to individual third parties for their personal use, but only if you acknowledge the website as the source of the material

You may not, except with our express written permission, distribute or commercially exploit the content. Nor may you transmit it or store it in any other website or other form of electronic retrieval system.

Coolstrip and SDL Lighting are divisions of Spimin Developments Ltd.