Conctact us on (+44) 1253 881000
LED lights and LED lighting have in recent times become universally established as a low energy and low maintenance means of illumination, this is due to new developments in LED technology and the ever increasing need for efficient, green solutions. LED lighting can be up to ten times more energy efficient than current incandescent lights. They remain close to room temperature, which can cut down energy use even further by reducing the need for air-conditioning to counteract the heat given from incandescent lights. LED lighting is longer lasting than conventional alternative luminaries typically lasting tens of thousands of hours. They are resistant to heat, cold, shock and vibration and they do not flicker like fluorescent tubes.
The Coolstrip range of LED lighting is suitable for a wide variety of applications including architectural, low voltage, landscape, outdoor and nightclub lighting.
A wide range of low voltage LED lighting fixtures, fittings and low voltage lighting power supplies are available to allow trouble free installation of the Coolstrip range of products in many lighting projects.
The case for changing to LED Lighting - Incandescent light bulbs are immensely wasteful, expending over 90 percent of the energy flowing through them as heat. LED Lighting produces far less heat, this efficiency means that they remain close to room temperature, which can cut down energy use even further by reducing the need for air-conditioning to counteract the heat emitted by incandescent lights. Although fluorescent tubes/bulbs are more efficient their harsh light output and flicker has prevented them from being a winning solution in the lighting market. The answer is LED Lighting, LEDs are long-lasting, rugged and many times more efficient than incandescent bulbs.
The Coolstrip range of LED strip lighting products is manufactured by skilled technicians, using state of the art manufacturing techniques at our 22,000 square foot factory in Poulton-le-Fylde, Lancashire..As we are a manufacturer we can very often provide custom designed LED lighting solutions.
Coolstrip Product Range
[an error occurred while processing this directive]
The Coolstrip Flex range is a sealed flexible LED strip. The product
is available in 5 bright colours, and is sealed to IP 67 so that
it can be used in exterior lighting applications. A range of extrusions
are available so that the LED strip can be mounted in stair nosing
and in ground applications for escape route demarcation or in the
entertainment industry. A range of low voltage power supplies are
available to drive various lengths of LED strip.
Coolstrip RGB LED Strip Lighting
Coolstrip RGB utilises a new breed of LED which features three dies in
one LED, giving any combination of Red Green Blue (RGB). Drive electronics
are available to provide a range of colour change sequence controls for
stand alone use or for connection to DMX systems when used in Nightclub
or Bar applications.
This is an innovative product allowing for easy fitting of the LED strip.
The strip utilises surface mount LED's along with other components on an
ultra flexible PCB, backed with very strong dual sided adhesive tape to
facilitate fitting around curved surfaces. Coolstrip tape is supplied on
5 Metre reels. A range of low voltage power supplies are available to drive
PowerStrip V30 & V15
Our PowerStrip RGB (Red Green Blue) Colour change products feature Luxeon High
Power LED's. There are two versions of the product. One is an 15 LED strip,
measuring 500mm in length, the other being 30 LED, and 1000mm in length. PowerStrip
is ideal for applications where a large amount of light is required such as
wall or ceiling washing. PowerStrip is used extensively in the entertainment
industry for creating spectacular displays. A wide range of drivers are available
to create many different special effects and colour change sequences. They can
be linked into DMX sound systems for sound to light scenes. The product can
be manufactured using single colour Luxeon LED's if required.
PowerLed 3 - High Power RGB or white LED Illumination uplighter/downlighter
These 50mm diameter LED modules fit standard open back MR16 fittings. Up to
12 modules can be driven from one PowerDriver 36 control unit or 3 modules from
a PowerDriver 9.. The RGB version can be used with DMX or manual colour change
A range of high output LED fittings utilising our standard 12 x 1 watt LED
modules. They can be used with various SDL driver electronics. Up to 3 units
can be driven from one PowerDriver 36 control unit.
A versatile encapsulated LED strip sealed into a flexible plastic strip to
prevent water ingress. Available in True White or RGB.
FlexLed SMT - Slimline Flexible LED Illumination
FlexLed SMT is a versatile flexible LED strip. The surface mount LED's
are on an 8mm wide flexible PCB with an adhesive backing on the rear to
allow quick and easy installation. Very low power at just 7.2 W per metre.
Stair Marker Light
This low cost, low energy stair marker light is designed to provide a fit
and forget solution for restaurant, bars, and night club venues. Being surface
mount LED powered, this unit is ideal for use in busy areas or where vibration
is a problem for filament lamps. Up to 70 units can be powered from one
60 VA lighting transformer.